- A
- E
- G
- I
- L
- O
- Q
- R
- V
- W
實例公開方法
add_source(source, options = {}, &block) 連結
將指定的來源新增至 Gemfile
如果給定了區塊,區塊中的 gem 條目會被包裝到來源群組中。
add_source "http://gems.github.com/"
add_source "http://gems.github.com/" do
gem "rspec-rails"
end
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 151 def add_source(source, options = {}, &block) log :source, source in_root do if block append_file_with_newline "Gemfile", "\nsource #{quote(source)} do", force: true with_indentation(&block) append_file_with_newline "Gemfile", "end", force: true else prepend_file "Gemfile", "source #{quote(source)}\n", verbose: false end end end
environment(data = nil, options = {}) 連結
將設定程式碼新增至 Rails 執行時環境。
預設情況下,會將程式碼新增至 config/application.rb
中的 Application
類別內,使其適用於所有環境。
environment %(config.asset_host = "cdn.provider.com")
結果為
# config/application.rb
class Application < Rails::Application
config.asset_host = "cdn.provider.com"
# ...
end
如果指定了 :env
選項,程式碼將會新增至 config/environments
中的對應檔案。
environment %(config.asset_host = "localhost:3000"), env: "development"
結果為
# config/environments/development.rb
Rails.application.configure do
config.asset_host = "localhost:3000"
# ...
end
:env
也可以是一個陣列。在這種情況下,程式碼會新增至 config/environments
中的每個對應檔案。
程式碼也可以指定為區塊的回傳值
environment do
%(config.asset_host = "cdn.provider.com")
end
environment(nil, env: "development") do
%(config.asset_host = "localhost:3000")
end
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 206 def environment(data = nil, options = {}) sentinel = "class Application < Rails::Application\n" env_file_sentinel = "Rails.application.configure do\n" data ||= yield if block_given? in_root do if options[:env].nil? inject_into_file "config/application.rb", optimize_indentation(data, 4), after: sentinel, verbose: false else Array(options[:env]).each do |env| inject_into_file "config/environments/#{env}.rb", optimize_indentation(data, 2), after: env_file_sentinel, verbose: false end end end end
gem(*args) 連結
在 Gemfile
中為指定的 gem 新增 gem
宣告。
gem "rspec", group: :test
gem "technoweenie-restful-authentication", lib: "restful-authentication", source: "http://gems.github.com/"
gem "rails", "3.0", git: "https://github.com/rails/rails"
gem "RedCloth", ">= 4.1.0", "< 4.2.0"
gem "rspec", comment: "Put this comment above the gem declaration"
請注意,此方法只會將 gem 新增至 Gemfile
;它不會安裝 gem。
選項
:version
-
gem 的版本限制,指定為字串或字串陣列
gem "my_gem", version: "~> 1.1" gem "my_gem", version: [">= 1.1", "< 2.0"]
或者,可以指定為 gem 名稱後的一個或多個參數
gem "my_gem", ">= 1.1", "< 2.0"
:comment
-
在
Gemfile
中的gem
宣告上方輸出註解。gem "my_gem", comment: "First line.\nSecond line."
輸出
# First line. # Second line. gem "my_gem"
:group
-
Gemfile
中 gem 所屬的 gem 群組。 :git
-
gem 的 git 儲存庫網址。
傳遞給此方法的任何其他選項都將附加到 Gemfile
中的 gem
宣告。例如
gem "my_gem", comment: "Edge my_gem", git: "https://example.com/my_gem.git", branch: "master"
輸出
# Edge my_gem
gem "my_gem", git: "https://example.com/my_gem.git", branch: "master"
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 67 def gem(*args) options = args.extract_options! name, *versions = args # Set the message to be shown in logs. Uses the git repo if one is given, # otherwise use name (version). parts, message = [ quote(name) ], name.dup # Output a comment above the gem declaration. comment = options.delete(:comment) if versions = versions.any? ? versions : options.delete(:version) _versions = Array(versions) _versions.each do |version| parts << quote(version) end message << " (#{_versions.join(", ")})" end message = options[:git] if options[:git] log :gemfile, message parts << quote(options) unless options.empty? in_root do str = [] if comment comment.each_line do |comment_line| str << indentation str << "# #{comment_line}" end str << "\n" end str << indentation str << "gem #{parts.join(", ")}" append_file_with_newline "Gemfile", str.join, verbose: false end end
gem_group(*names, &block) 連結
將 gem 條目包裝在群組內。
gem_group :development, :test do
gem "rspec-rails"
end
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 111 def gem_group(*names, &block) options = names.extract_options! str = names.map(&:inspect) str << quote(options) unless options.empty? str = str.join(", ") log :gemfile, "group #{str}" in_root do append_file_with_newline "Gemfile", "\ngroup #{str} do", force: true with_indentation(&block) append_file_with_newline "Gemfile", "end", force: true end end
generate(what, *args) 連結
執行另一個產生器。
generate "scaffold", "Post title:string body:text"
generate "scaffold", "Post", "title:string", "body:text"
第一個參數是產生器名稱,其餘參數會連接在一起並傳遞給產生器。
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 332 def generate(what, *args) log :generate, what options = args.extract_options! options[:abort_on_failure] = !options[:inline] rails_command "generate #{what} #{args.join(" ")}", options end
git(commands = {}) 連結
執行一個或多個 git 命令。
git :init
# => runs `git init`
git add: "this.file that.rb"
# => runs `git add this.file that.rb`
git commit: "-m 'First commit'"
# => runs `git commit -m 'First commit'`
git add: "good.rb", rm: "bad.cxx"
# => runs `git add good.rb; git rm bad.cxx`
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 237 def git(commands = {}) if commands.is_a?(Symbol) run "git #{commands}" else commands.each do |cmd, options| run "git #{cmd} #{options}" end end end
github(repo, options = {}, &block) 連結
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 125 def github(repo, options = {}, &block) str = [quote(repo)] str << quote(options) unless options.empty? str = str.join(", ") log :github, "github #{str}" in_root do if @indentation.zero? append_file_with_newline "Gemfile", "\ngithub #{str} do", force: true else append_file_with_newline "Gemfile", "#{indentation}github #{str} do", force: true end with_indentation(&block) append_file_with_newline "Gemfile", "#{indentation}end", force: true end end
initializer(filename, data = nil) 連結
在 config/initializers/
中建立一個初始化檔案。程式碼可以指定為參數或區塊的回傳值。
initializer "api.rb", <<~RUBY
API_KEY = "123456"
RUBY
initializer "api.rb" do
%(API_KEY = "123456")
end
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 319 def initializer(filename, data = nil) log :initializer, filename data ||= yield if block_given? create_file("config/initializers/#{filename}", optimize_indentation(data), verbose: false) end
lib(filename, data = nil) 連結
在 lib/
中建立一個檔案。內容可以指定為參數或區塊的回傳值。
lib "foreign.rb", <<~RUBY
# Foreign code is fun
RUBY
lib "foreign.rb" do
"# Foreign code is fun"
end
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 275 def lib(filename, data = nil) log :lib, filename data ||= yield if block_given? create_file("lib/#{filename}", optimize_indentation(data), verbose: false) end
rails_command(command, options = {}) 連結
執行指定的 Rails 命令。
rails_command "db:migrate"
rails_command "db:migrate", env: "production"
rails_command "db:migrate", abort_on_failure: true
rails_command "stats", capture: true
rails_command "gems:install", sudo: true
選項
:env
-
執行命令的 Rails 環境。預設為
ENV["RAILS_ENV"] || "development"
。 :abort_on_failure
-
如果命令以非成功結束狀態結束,是否停止產生器。
:capture
-
是否擷取並傳回命令的輸出。
:sudo
-
是否使用
sudo
執行命令。
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 391 def rails_command(command, options = {}) if options[:inline] log :rails, command command, *args = Shellwords.split(command) in_root do silence_warnings do ::Rails::Command.invoke(command, args, **options) end end else execute_command :rails, command, options end end
rake(command, options = {}) 連結
執行指定的 Rake 任務。
rake "db:migrate"
rake "db:migrate", env: "production"
rake "db:migrate", abort_on_failure: true
rake "stats", capture: true
rake "gems:install", sudo: true
選項
:env
-
執行任務的 Rails 環境。預設為
ENV["RAILS_ENV"] || "development"
。 :abort_on_failure
-
如果任務以非成功結束狀態結束,是否停止產生器。
:capture
-
是否擷取並傳回任務的輸出。
:sudo
-
是否使用
sudo
執行任務。
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 364 def rake(command, options = {}) execute_command :rake, command, options end
rakefile(filename, data = nil) 連結
在 lib/tasks/
中建立 Rake 任務檔案。程式碼可以指定為參數或區塊的回傳值。
rakefile "bootstrap.rake", <<~RUBY
task :bootstrap do
puts "Boots! Boots! Boots!"
end
RUBY
rakefile "bootstrap.rake" do
project = ask("What is the UNIX name of your project?")
<<~RUBY
namespace :#{project} do
task :bootstrap do
puts "Boots! Boots! Boots!"
end
end
RUBY
end
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 302 def rakefile(filename, data = nil) log :rakefile, filename data ||= yield if block_given? create_file("lib/tasks/#{filename}", optimize_indentation(data), verbose: false) end
readme(path) 連結
讀取來源根目錄中指定的檔案,並將其列印在控制台中。
readme "README"
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 442 def readme(path) log File.read(find_in_source_paths(path)) end
route(routing_code, namespace: nil) 連結
在 Rails 路由檔 config/routes.rb
中建立一個條目
route "root 'welcome#index'"
route "root 'admin#index'", namespace: :admin
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 409 def route(routing_code, namespace: nil) namespace = Array(namespace) namespace_pattern = route_namespace_pattern(namespace) routing_code = namespace.reverse.reduce(routing_code) do |code, name| "namespace :#{name} do\n#{rebase_indentation(code, 2)}end" end log :route, routing_code in_root do if namespace_match = match_file("config/routes.rb", namespace_pattern) base_indent, *, existing_block_indent = namespace_match.captures.compact.map(&:length) existing_line_pattern = /^[ ]{,#{existing_block_indent}}\S.+\n?/ routing_code = rebase_indentation(routing_code, base_indent + 2).gsub(existing_line_pattern, "") namespace_pattern = /#{Regexp.escape namespace_match.to_s}/ end inject_into_file "config/routes.rb", routing_code, after: namespace_pattern, verbose: false, force: false if behavior == :revoke && namespace.any? && namespace_match empty_block_pattern = /(#{namespace_pattern})((?:\s*end\n){1,#{namespace.size}})/ gsub_file "config/routes.rb", empty_block_pattern, verbose: false, force: true do |matched| beginning, ending = empty_block_pattern.match(matched).captures ending.sub!(/\A\s*end\n/, "") while !ending.empty? && beginning.sub!(/^[ ]*namespace .+ do\n\s*\z/, "") beginning + ending end end end end
vendor(filename, data = nil) 連結
在 vendor/
中建立一個檔案。內容可以指定為參數或區塊的回傳值。
vendor "foreign.rb", <<~RUBY
# Foreign code is fun
RUBY
vendor "foreign.rb" do
"# Foreign code is fun"
end
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 258 def vendor(filename, data = nil) log :vendor, filename data ||= yield if block_given? create_file("vendor/#{filename}", optimize_indentation(data), verbose: false) end
實例私有方法
execute_command(executor, command, options = {}) 連結
根據提供的 executor 參數,使用「rake ...」或「rails ...」執行提供的命令。
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 461 def execute_command(executor, command, options = {}) # :doc: log executor, command sudo = options[:sudo] && !Gem.win_platform? ? "sudo " : "" config = { env: { "RAILS_ENV" => (options[:env] || ENV["RAILS_ENV"] || "development") }, verbose: false, capture: options[:capture], abort_on_failure: options[:abort_on_failure], } in_root { run("#{sudo}#{Shellwords.escape Gem.ruby} bin/#{executor} #{command}", config) } end
indentation() 連結
將 Gemfile
縮排到 @indentation 的深度
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 494 def indentation # :doc: " " * @indentation end
log(*args) 連結
為了向後相容性定義 log。如果只傳送一個參數,則呼叫 say,否則呼叫 say_status。與 say 不同,且與 say_status 類似,此方法會遵守給定的 quiet? 選項。
原始碼:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 450 def log(*args) # :doc: if args.size == 1 say args.first.to_s unless options.quiet? else args << (behavior == :invoke ? :green : :red) say_status(*args) end end
optimize_indentation(value, amount = 0) 連結
傳回具有縮排的最佳化字串
來源:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 487 def optimize_indentation(value, amount = 0) # :doc: return "#{value}\n" unless value.is_a?(String) "#{value.strip_heredoc.indent(amount).chomp}\n" end
quote(value) 連結
永遠以雙引號回傳值。
來源:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 475 def quote(value) # :doc: if value.respond_to? :each_pair return value.map do |k, v| "#{k}: #{quote(v)}" end.join(", ") end return value.inspect unless value.is_a? String "\"#{value.tr("'", '"')}\"" end
with_indentation(&block) 連結
為 DSL 行為區塊管理 Gemfile
的縮排
來源:顯示 | 在 GitHub 上
# File railties/lib/rails/generators/actions.rb, line 499 def with_indentation(&block) # :doc: @indentation += 1 instance_eval(&block) ensure @indentation -= 1 end